Please Note: After a recent Tesla software update, the ability to manually initiate the TPMS Reset has been removed from many vehicles. Instead the vehicle should determine that a change has occurred within the first 20 minutes of driving after a new sensor has been fitted, at which point the driver will be displayed with the option to select the correct wheel size.

Because the message sometimes now takes a long time to display, or in some cases does not display at all for the first few times the vehicle is driven after a wheel, tyre, or sensor change, a TPMS reset may not occur until a significant amount of driving has occurred. Additionally, if the vehicle is not stationary for at least 20 minutes between drives then the sensors will not be able to provide their locations, which will further delay the process.

Other factors that may delay the TPMS reset include transporting the original sensors (or wheels with the original sensors mounted) inside the vehicle, starting the TPMS Reset from the same location that the original sensors were removed, and driving the Tesla in close proximity to other Tesla vehicles.

Vehicle TPMS Information

Make:Tesla
Model:Model S
Model Code:5YJS
Date of Manufacture:August 2014 - May 2022
OE Sensor Manufacturer:CONTINENTAL
OE Sensor Number:

1034602

The following sensors are all compatible with: Tesla Model S 2014-2022.

Direct Replacement Sensors

HSCH-S535

Schrader Pre-Programmed EZ Delta Clamp-In Sensor

Harvie TPMS Configurable and Programmable Sensors

HHTS-A68BM

EU-Pro Hybrid 3.5 3200 Silver Clamp-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

HHTS-A68BA

EU-Pro Hybrid 3.5 3200 Snap-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

HHTS-A68BN

EU-Pro Hybrid 3.5 3200 Black Clamp-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

HHTS-A68BP

EU-Pro Hybrid 3.5 3200 Graphite Clamp-In Sensor

Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)

HHTS-A71BM

EU-Pro Hybrid NFC HTS-3300 Silver Clamp-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones. ... (more)

HHTS-A71BA

EU-Pro Hybrid NFC HTS-3300 Snap-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones. ... (more)

HHTS-A71BN

EU-Pro Hybrid NFC HTS-3300 Black Clamp-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones. ... (more)

HHTS-A71BP

EU-Pro Hybrid NFC HTS-3300 Graphite Clamp-in Sensor

The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones. ... (more)

Other Compatible Sensors

HSCH-S164

Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz

Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)

HALI-S114

Alligator Sens.It Snap-In Sensor 433MHz

Alligator programmable Sens.It sensor 433Mhz. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.

HALI-S113

Alligator Sens.It Clamp-In Sensor 433MHz

Alligator programmable Sens.It sensor 433Mhz. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.

Service parts for the VDO TG1C Clamp-In style sensor:

OE Parts

HSCH-V006_10

Box Of 10 Clamp-In Valves for VDO TG1C

A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap . These valves are suitable for use with... (more)

AM Parts

H6-231

Box Of 10 Replacement Clamp-In Valves for VDO TG1C

A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap. These valves are suitable for use with VDO TG1C ... (more)

H6-231C

Box Of 10 Replacement Clamp-In Valves for VDO TG1C

A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve C... (more)

H6-138

Box Of 10 Service Kits for VDO TG1C

A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core. This ser... (more)

You must be logged in to view relearn procedures.

Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.